Safety And Care - Optelec MultiView Manuel De L'utilisation

Optelec

2. Safety and Care

Only use the MultiView indoors.
Do not expose the MultiView to extreme or rapid changes in temperature or
humidity. Do not place the MultiView near a radiator or heater, or where it
may be exposed to direct sunlight. These conditions may damage the
MultiView's electronic or optical components.
Do not use the MultiView near other electrical appliances or
inadequately-shielded medical devices as this could cause electromagnetic
interferences.
Do not place the MultiView on an unstable surface as it may result in a fall,
causing serious damage to the unit or injury to the user.
Handle the MultiView with care. Any rough handling will damage its internal
components.
When moving the MultiView to another location, disconnect the power
cable along with all other cables from all external connectors. To carry the
MultiView in a safe and easy manner, use the provided handle located at
the back of the unit.
The reading table and camera arm feature moving and removable
mechanical parts. Please ensure your safety when removing or adjusting
these mechanical parts (users are not recommended to remove these
mechanical parts frequently). Injury could occur if fingers or loose clothing
become caught in the operating mechanisms. If you experience any
difficulties operating the unit safely, please ask for help by contacting your
local Optelec distributor.
Do not remove any parts from the MultiView. Contact your local Optelec
distributor to service your MultiView, if needed. Do not open any of the
components as this will void the warranty. Each component contains parts
which should only be serviced by an Optelec repair specialist.
Always turn the power off when the system is not in use.
Always unplug the system before cleaning it. Use a soft, damp cloth to
clean its external parts. Do not use cleaning agents or abrasive materials
as they will damage your unit. Avoid touching the lens of the camera and
keep it clean by using proper cleaning means.
Only use the supplied power cable.
Do not use the unit in temperatures under +5°C and above +40°C.
Any use of the MultiView other than what is described in this user manual will
exclude it from warranty conditions.
English
MultiView
Page 6