Locking The Reading Table; Using The Footswitch - Optelec ClearView+ Manuel D'utilisation

Optelec

Locking the reading table

Lift the red lever located at the
front of the table to lock the
table in a stable position. This
is very useful when writing,
painting and doing hobbies and
crafts. Unlock the table by simply lifting the lever once
again.
Please note: When the ClearView
brake will automatically lock into position. When the
ClearView
sure to push the reading table backwards to its home
position prior to turning off.

Using the footswitch

The optional footswitch on the PC unit allows you to toggle
between the image of the ClearView
(computer) or other connected VGA source, such as an
external camera as well as providing Picture-in-Picture. The
footswitch on a Monochrome, Color or HD unit allows you to
toggle between the images of the ClearView
external source such as a PC (computer).
Please note: If your ClearView
with a 22" TFT monitor, the footswitch allows you to
toggle between the ClearView
screen (showing both the ClearView
computer image in the ratio 50:50) and full screen
computer image.
English
+
is switched on, the brake will unlock. Make
+
power is off, the
+
and a connected PC
+
+
Color unit is equipped
+
image, vertical split-
+
image and
+
ClearView
and of an
15