Optelec ClearView+ Manuel D'utilisation page 29

Optelec
The computer image is not displaying
- Check to see if the Advanced Feature Pack is installed.
- Verify the computer's video (VGA) connection to the
base unit (do not connect the PC directly to the
monitor).
- Check the status of the
- When operating with the footswitch, check to see if the
Advanced Feature Pack is installed.
- Check the computer for any malfunction by connecting
the PC directly into the monitor.
The reading table does not move or does not move
smoothly
- Unlock the table by pulling the lever, located under the
front of the table.
- Inspect the tracks for dust or any other obstructions.
English
button.
+
ClearView
27