Activating Line Markers / Window Shades; Positioning Line Markers / Window Shades - Optelec ClearView C Mode D'emploi

Optelec
4.3. The Advanced Control Pad
The Advanced Control Pad is correctly placed in the reading table when five
rectangular buttons are facing you and three larger buttons are on top of the
Control Pad.
4.3.1. Adjusting the image control
"sun" icon once (most left button). Now use the Zoom dial to adjust the image
control. If no button is pressed within three seconds, the Zoom dial will revert
back to its original zoom function.

4.3.2. Activating line markers / window shades

are used as guides to make reading text easier or to help you write under the
ClearView C. The window shades function is used to block a part of an image
when screen brightness becomes inconvenient or when you need to
concentrate on only one or two lines of text.

4.3.3. Positioning line markers / window shades

to move the line marker or window shade. Press the Lines / Windows button to
adjust the other line or window shade. To move the other line marker or window
shade use the Zoom dial. Press the Lines / Windows button again to exit Lines
/ Windows modification mode.
22
If characters or other on-screen elements are not clearly
visible, use the image control to enhance the image and
increase the sharpness. To adjust the image control, press
the white Image Control button marked with a dot and a
Pressing the gray Lines / Windows button (second button
from the left) cycles you through the line markers, window
shades and full screen camera image modes. Line markers
When line markers or window shades are activated,
press the gray Lines / Windows button for 3 seconds. The
top or left line or window shade blinks to indicate it can
be moved up, down, left and / or right. Use the Zoom dial
ClearView C
English