Optelec ClearView C Mode D'emploi page 16

Optelec
2.4. Switching the table setup
Compact setup
The ClearView C has two table setups: the Compact setup and the wide
Comfort setup. The Compact setup is the standard setup. If you would like to
have more space, for instance when doing craftwork or reading larger
documents, you can switch to the Comfort setup. Please refer to the
Instruction Sheet for switching the Table Setup for step-by-step pictures.
To switch from the Compact to Comfort setup:
1. Remove the monitor.
2. Release the brakes and slide the table top to the right.
3. Loosen the black knob.
4. Slide the table top back to its position and secure the brakes by sliding
them to the middle.
5. Hold the table and pull the arm out until you hear a click.
6. Slide the table top to the right and secure the black knob.
7. Remove the cap from the top of the C-shaped arm and loosen the black
knob.
8. Slide the camera box to the right, secure the black knob and place the
cap back on the arm.
9. Place the monitor on the display adjustment.
To switch back to the Compact setup:
1. Remove the monitor.
2. Release the brakes and slide the table top to the right.
3. Loosen the black knob.
4. Slide the table top back to its position and secure the brakes by sliding
them to the middle.
5. Hold the table and push the arm into the table until you hear a click.
6. Slide the table top to the right and secure the black knob.
7. Remove the cap from the top of the C-shaped arm and loosen the black
knob.
8. Slide the camera box to the left,secure the black knob and place the cap
back on the arm.
9. Place the monitor on the display adjustment.
16
ClearView C
Comfort setup
English