Switching The Power On And Off - Optelec Compact 7 HD Manuel D'utilisation

Optelec
On/Off switch
12V DC IN jack

Switching the power on and off

To switch on the Compact 7 HD for the first time, the unit needs to be charged. Once
charged, press the orange oval on / off switch located on the right of the white Open button
in the centre at the bottom of the screen for one second. The unit will start up in the mode in
which it was switched off. To switch off the Compact 7 HD, press the orange oval button
again for one second.
15
Pressing the oval orange button, located right of the white Open
button in the centre at the bottom of the screen, for one second, will
switch the unit on and off.
The 12V DC IN jack is located on the left side at the bottom corner
of the Compact 7 HD. The power supply cable connects to this jack.
Use only the indicated power supply that comes with the Compact 7
HD to power and charge the unit.
The camera of the Compact 7 HD is located at the back of the
unit. To the left and right of the camera are two object lights that
are used when the unit is in the closed position.
Compact 7 HD
English