Power On And Off; Standby; Sleep And Resume - Optelec Compact 10 HD Manuel D'utilisation

Optelec Compact 10 HD & Compact 10 HD Speech

2.2. Power on and off

To switch on the Compact 10 HD for the first time, the unit needs to be charged. Once charged,
hold down the orange On / Off switch. To switch off the Compact 10 HD, press the orange button
for three seconds again. When switching on the Compact 10 HD, it will take approximately 20
seconds before an image displays on screen.

Standby

The Compact 10 HD will automatically go into standby mode if no button is pressed or no movement
is detected. Pressing the orange on / off button will switch it back on. The standby time can be
changed or disabled in the Compact 10 HD menu. Please refer to chapter 5.2 on how to change
these settings.

Sleep and resume

When the Compact 10 HD is switched on, a click of the orange On / Off button will place the unit
into sleep mode. A click of the orange On / Off button again will resume the Compact 10 HD
operation in the mode in which it was put to sleep. When resuming from sleep, the Compact 10 HD
will take approximately 1 second before an image displays on screen.
English 21