Columns (Compact 10 Hd Speech Only); Lights; Sound; Standby - Optelec Compact 10 HD Manuel D'utilisation

Optelec

Columns (Compact 10 HD Speech only)

This menu item allows you to choose if you want the Compact 10 HD Speech to only
read full columns, or incomplete columns as well. By default, Read full columns only
is selected. Please note that if you select to read incomplete columns, not all
characters and words are fully captured, which may result in incoherent text.

Lights

This menu item allows you to enable or disable the lights in Magnifier mode and in Overview mode.
The Magnifier lights are located to the left and right of the magnifier camera. By default, the reading
lights are enabled for an optimal image quality.
The Overview light is located next to the overview camera. By default, the overview light is disabled.

Sound

This menu item allows you to change the volume, mute the audio feedback and enable or disable
the vibration feedback. By default, sound is enabled and vibration is disabled.

Standby

This menu item allows you to adjust the standby time. The standby time sets the time after which
the Compact 10 HD goes into standby mode to conserve power. Pressing any button will take the
unit out of standby mode. By default, the standby time is set to 5 minutes after no button is pressed
or no movement of the Compact 10 HD is detected.
44
Compact 10 HD & Compact 10 HD Speech
English