Bluetooth (Compact 10 Hd Speech Only) - Optelec Compact 10 HD Manuel D'utilisation

Optelec
To connect your the Compact 10 HD to a monitor or TV via Miracast, tap the ""Miracast""button and
Switch Miracast on. A list with available devices will be displayed. Click on a device to connect. It
could take up to a minute to establish the connection. Tap on the device again to disconnect. When
a Miracast connection is established, both the audio and video will be streamed to the TV or monitor.
To guarantee a good connection, the Compact 10 HD needs to be within one meter or three feet of
the monitor or TV. Depending on the connection, a short delay of the video and / or audio could be
noticed.

Bluetooth (Compact 10 HD Speech only)

To connect a Bluetooth speaker or headphone, tap the "Bluetooth" button and switch
Bluetooth on. A list with paired devices is being displayed.
If no speaker or headphone is being paired, tap the "Search" button to search for available devices.
Before starting the Bluetooth search, make sure the speaker or headphone is switched on and is
set to discoverable. Please refer to the speaker's or headphone's manual on how to switch the
device to Bluetooth discoverable mode. To pair the speaker or headphone, tap on the device name
and if needed enter the pin code. Refer to the speaker's or headphone's manual for the pin code of
the device.
When the device is paired, to connect the speaker or headphone, tap the device. You will be asked
to connect or forget the device. Tap the "Connect" button to make the connection.
42
Compact 10 HD & Compact 10 HD Speech
English