Adjusting The Magnification - Optelec Compact 7 HD Manuel D'utilisation

Masquer les pouces Voir aussi pour Compact 7 HD:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Optelec
Compact 7 HD
When switching on the Compact 7 HD, it will take approximately 3 seconds before an image
displays on screen.
The unit can also be switched on by opening the Compact 7 HD as described earlier. This is
a default setting. Closing the unit will automatically turn it off. The turn-on-upon-opening and
turn-off-upon-closing functions can be enabled or disabled in the menu. Please refer to
Chapter 4 for more information on how to change these settings.

Adjusting the magnification

To change the magnification settings of the unit, simply press the + or – button located on
the right side of the screen. Press the + button to increase or the – button to decrease the
magnification. In the open position, when placed on a document, the magnification level
starts at 2.5 times and can be increased to 30 times. The Compact 7 HD is equipped with an
auto-focus camera. This allows you to use the unit while holding it in your hands in the
closed position. This will provide more overview, but this will decrease the minimum and
maximum magnification levels.
English
16

Publicité

Table des Matières
loading

Table des Matières