Turning Off The Clearreader; Reading Text; Reading Tables And Spreadsheets; Adjusting The Volume - Optelec ClearReader+ Manuel D'utilisation

+
Optelec ClearReader
+

Turning off the ClearReader

+
Press and hold the Power button for approximately 6 seconds to power down the ClearReader
completely. The power down sound will be played and the Power indicator will turn off.

Reading text

Press the Scan button to capture and start reading a document positioned beneath the camera.
After pressing the Scan button, you will hear the snapshot sound and within a few seconds the
+
ClearReader will begin reading to you.

Reading tables and spreadsheets

To read tables, receipts and bank statements, press and hold the Scan button for more than 2
seconds until you hear a clicking sound. A long press of the Scan button will enable the Table
Reading mode and will disable the automatic column recognition making it possible to read
across columns. Text will be read from left to right ignoring column borders.

Adjusting the volume

Turn the Volume dial clockwise and release it to slightly increase the
volume of the reading voice. Alternatively, turn the dial counterclockwise
and release it to slightly decrease the volume. To rapidly adjust the
volume turn and hold the dial to the end position. When releasing the dial
it will always move back to its start position.
English Page 14