Standby Time; Language; Statistics - Rotel Aromatica DIGITAL 271 Mode D'emploi

Standby time

This function allows you to program when the coffee machine should go to standby
mode after the last use. The factory setting is 5 hrs.
• Press the programming button P in order to start program mode.
• Press the > button until the display shows TIMES.
• Press the ok button.
• Press the > button until you see the unit off after in the display.
• Confirm with the ok button.
• Press the > button until you see the number of hours (1–12 hours are possible) until
standby begins in the display.
☛
If you never want the coffee machine to go to standby mode, select NEVER.
• Confirm with the ok button. The display will now show unit off after.
• By pressing the exit key, you go directly to the program mode PROGRAM TIMES.
• From this point you can go directly to programming other settings or use the exit
button to leave program mode.

4.5 Language

You can set your coffee machine for one of eight languages: German, English, French,
Italian, Spanish, Dutch, Russian and Portuguese. The factory setting is German.
• Press the programming button P in order to start program mode.
• Press the > button until the display shows sprache
• Press the ok button.
• Press the > button until you see your language in the display.
• Confirm with the ok button. The display will now show Program LANGUAGE.
• From this point you can go directly to programming other settings or use the exit
button to leave program mode.

4.6 Statistics

In this program setting, you can read how often the following functions have been
selected: 1 CUP / 2 CUPS / GROUNDS / TOTAL (number of cups)
WATER / STEAM / CLEANING / DECALCIFY / FILTER CHANGE
• Press the programming button P in order to start program mode.
• Press the > button until the display shows STATIST.
• Press the ok button.
• Press the > button until you see the desired message in the display.
• The ok button will return you to PROGRAM STATist. from any position.
• From this point you can go directly to programming other settings or use the exit
button to leave program mode.
31