Using Your Coffee Machine For The First Time; Filling The System; Setting The Fineness Of The Coffee Mill - Rotel Aromatica DIGITAL 271 Mode D'emploi

• Open the cover to the bean holder (18) and fill it with coffee beans.
☛
Never use beans which have been treated with additives, such as sugar, during
or after roasting. This can damage the milling mechanism, and any such
damage is not covered under the guarantee.
• Please make sure that the steam/hot water dial (11) is set to 0.

2.2 Using your coffee machine for the first time

• Pull the power cord from the cord compartment (14) and plug it in.
• Switch on the power switch (15). The on/off button (2) lights up.
• Press the on/off button (2). On the display is: sys. Is heating
• After the coffee machine has heated up, the display will show PLEASE RINSE and
the service button (7) will blink.
• Press the service button (7) ant the system will be rinsed out through the coffee outlet (8).
• Your coffee machine is now ready for operation.
TIP: Hold a receptacle under the output in order to collect the water.
☛
You may rinse the coffee machine through the coffee outlet (8) at any time
during normal operation by pressing the service button (7).

Filling the system

Since the machine is fresh from the factory, it is possible that the water lines in the cof-
fee machine are not filled with water when you use it for the first time. In this case, it
will be indicated as follows:
• After the machine is turned on with the on/off button (2) the Fill up pipe-sys alter-
nates with TURN valve
• Open the steam/hot water dial (11) by turning it clockwise. The system will now be
filled and some water could drip out of the jet (12).
• As soon as TURN valve appears, turn the vent or dial (11) counterclockwise to turn it off.
• The service button (7) will blink and Please rinse will appear after the system has
heated up.
• Press the service button (7) and the system will be rinsed out through the coffee outlet (8).
• Your coffee machine is now ready for operation.

2.3 Setting the fineness of the coffee mill

Please note: Adjust the fineness setting only when the coffee mill is in operation.
You can adjust the degree of coarseness in the milling work for the way your coffee
beans have been roasted. We recommend, however, that you leave the coffee mill at
the medium setting.
• Open the cover of the bean holder (18).
• Turn the adjustment knob (19) to the desired position with the mill running. The
smaller the point, the finer the coffee is ground. Please note:
– Light roasted beans require a fine setting.
– Dark roasted beans require a coarse setting.
24