Time; Current Time; Startup Time - Rotel Aromatica DIGITAL 271 Mode D'emploi

• Press the ok button.
• Press the > button until see the setting you want in the display.
• Confirm with the ok button. The display will now show PROGRAM TEMP.
• From this point you can go directly to programming other settings or use the exit
button to leave program mode.

4.4 Time

Current time

The current time is necessary to program standby time or startup time:
• Press the programming button P in order to start program mode.
• Press the > button until the display shows TIMEs.
• Press the ok button. The display will now show Time setting.
• Press the ok button. The display will now show HOURS>00:00 (with blinking arrow >).
• Press the > button until you see the hour setting you want in the display.
• Press the ok button. The display will now show the arrow behind the minutes
(00:00<).
• Press the > button until you see the minute setting you want in the display.
• Confirm with the ok button. The display will now show Time setting.
• By pressing the exit key, you go directly to the program mode PROGRAM TIME.
• From this point you can go directly to programming other settings or use the exit
button to leave program mode.
Please note: The setting for the current time is lost if the plug (15) is pulled out or if
power is lost.

Startup time

This function allows you to program when the coffee machine should start up.
☛
It will only work if you have previously set and saved the current time.
• Press the programming button P in order to start program mode.
• Press the > button until the display shows TIMES.
• Press the ok button.
• Press the > button until you see the unit on at in the display.
• Confirm with the ok button. The display will now show HOURS>00:00 (with blinking
arrow >).
• Press the > button until you see the hour setting you want in the display.
• Confirm with with the ok button. The display will now show the arrow behind the
minutes (00:00<).
• Press the > button until see the minute setting you want in the display.
• Confirm with the ok button. The display will now show Unit on at.
• By pressing the exit key, you go directly to the program mode PROGRAM TIMES.
• From this point you can go directly to programming other settings or use the exit
button to leave program mode.
☛
The setting for the startup time is not lost if the coffee machine is turned off or if
power is lost.
30