Turning The Unit On And Off; Power - Vision Fitness S7100hrt Guide Du Propriétaire

Masquer les pouces Voir aussi pour S7100hrt:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

PLACEMENT IN YOUR HOME
Please follow the safety instructions to place the Suspension Elliptical™ Trainer
in the location where it will best be used. It is important that you place your
Suspension Elliptical™ Trainer in a comfortable and inviting room. Avoid
putting your Suspension Elliptical™ Trainer in an unfinished basement or
undesirable setting. Exercise adherence will be easier to achieve only if you
exercise in an attractive setting.
STABILIZING THE SUSPENSION
LOOSEN
ELLIPTICAL TRAINER
After positioning the Suspension
Elliptical™ Trainer in its intended
location, check the unit's stability.
Rocking or wobbling indicates
that your Suspension Elliptical™
Trainer needs to be leveled.
Determine which leveler is not
ROTATE
resting completely on the floor.
Loosen the nut at the base of
the leveler to allow the leveler to
TIGHTEN
rotate. Now rotate the leveler to
the left or right until the Suspension
Elliptical™ Trainer is stable. Lock
the adjustment by tightening the nut
against the support tube.

TURNING THE UNIT ON AND OFF

Use the power switch on the front
of the unit to turn the machine ON
and OFF. It is recommended to
turn the machine off when not in
use.
NOTE
: You can also turn the power
7
off at the console.

Publicité

Table des Matières
loading

Table des Matières