Connecting To A Wireless Network; Reserving An Ip Address For Your Statim; Important - SciCan STATIM 2000 G4 Manuel De L'utilisateur

3 Setting up your STATIM
NOTE: Use QR code if connecting to a mobile device.
NOTE: Connection time will vary depending on your network speed, and making an initial connection can
take longer.

3.21 Connecting to a Wireless Network

STATIM G4 models offer Wireless capability for connecting units to the G4 network, adding flexibility
to the Network Cable connection that is also available with STATIM G4 units. STATIM G4 WiFi offers a
simple set-up and secure connection to the G4 network.
1. From the main screen, press the Network Icon.
2. Select WiFi, choose your network and enter your password.
Note: Your connection preference can be changed at any time

3.22 Reserving an IP Address for your STATIM

When your STATIM is connected to a router on your network, it is assigned a unique IP address. If
the connection between your STATIM and the router is lost (e.g. power failure, STATIM or router was
restarted), the re-established connection may be a different IP address. This may cause any previously
saved bookmarks or other saved links to become invalid.
To set a 'permanent' IP address (also known as establishing a DHCP/IP/Address Reservation), follow
these steps:
1. Select the Network icon From the STATIM G4 touchscreen and write down the numbers found for the
mm/dd/yyyy hh:mm:ss
SELECT A CYCLE
GATE (Router Local IP). Enter this GATE number in the address bar of your web browser to access
your router settings. (NOTE: You will need your network password to change the settings.)
NOTE: Accessing this screen will vary for each router, please consult your router's User Manual or
contact your network administrator for more detailed instructions. SciCan currently recommends D-Link
DIR-615 Wireless N router.
2. Use the 'DHCP/IP/Address Reservation' function to assign your STATIM a 'permanent' IP address.
(NOTE: Each manufacturer may use different nomenclature; this setting may be called: HCP
Reservation, IP Reservation, or Address Reservation.)
3. You will have to select the appropriate device to apply this setting. Your unit's default name will be:
'statim_###'.
IMPORTANT: Please contact your network administrator for more detailed instructions.
19