Vision Fitness Classique Mode D'emploi page 7

CLASSIC CONSOLE GETTING STARTED
1) Check to make sure no objects are placed on the belt that will hinder the movement of the treadmill.
2) Plug in the power cord and turn the treadmill ON.
3) Stand on the side rails of the treadmill.
4) Attach the safety key clip to part of your clothing making sure that it is secure and will not become detached during
operation.
5) Insert the safety key into the safety keyhole in the console.
6) You have two options to start your workout:
A) QUICK START UP
Simply press the START key to begin working out.
Time, distance, and calories will all count up from zero. OR...
B) SELECT A PROGRAM
1) Select USER 1, USER 2 or GUEST using
2) Set Age & Weight using
3) Select a program using PROGRAM KEYS and press ENTER to confirm.
4) Complete the program setup using
5) When setup is complete, press START to begin your workout.
FINISHING YOUR WORKOUT
When your workout is complete, the display will flash "WORKOUT COMPLETE" and beep. Your workout information will
stay displayed on the console for 30 seconds and then reset.
TO CLEAR SELECTION/RESET THE CONSOLE
Hold STOP key for 3 seconds.
and press ENTER to confirm.
or keypad and press ENTER to confirm.
and press ENTER to confirm.
CLASSIC
CONSOLE
7