Vision Fitness Classique Mode D'emploi page 5

Console du tapis roulant
Masquer les pouces Voir aussi pour Classique:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CLASSIC CONSOLE OPERATION
Note: There is a thin protective sheet of clear plastic on the overlay of the console that
should be removed before use.
A) LARGE LED DISPLAY WINDOW: displays workout time.
B) ALPHANUMERIC DISPLAY WINDOW: displays incline, distance, speed, calories,
pace, workout profile and heart rate.
C) START: press to begin exercising, start your workout, or resume exercising after
pause.
D) STOP: press to pause your workout. Press STOP again to end workout.
E) PROGRAM KEYS: press to select workout.
F)
INCLINE
KEYS: used to adjust incline in small increments (0.5%
Increments).
G) SPEED
KEYS: used to adjust speed in small increments (0.1 mph
increments). Press and hold to increase speed quickly (maximum increase of 1.0
MPH).
H) INCLINE TOGGLES (T40 & TF40 ONLY): used to adjust incline in small
increments (0.5% Increments).
I)
SPEED TOGGLES (T40 & TF40 ONLY): used to adjust speed in small increments
(0.1 mph increments).
J)
QUICK ADJUST KEYPAD: used to reach desired speed or incline more quickly.
K) SET INCLINE KEY: used to change incline to level entered into keypad.
L)
SET SPEED KEY: used to change speed to level entered into keypad.
M) ENTER / CHANGE DISPLAY KEY: press to confirm programming selections during
workout setup. Press to change display feedback during workout.
N) BACK: press to go back to the previous step during program setup.
O) USB PORT ACCESS POCKET: USB for software updates or charging devices. *
P) READING RACK: holds reading material.
Q) MEDIA PLAYER HOLDER: holds your media player or tablet.
R) SAFETY KEY POSITION: enables treadmill when safety key is inserted.
S) ENERGY SAVER LIGHT: indicates if machine is in energy saver mode. Press any
key to wake up the machine.
QUICK ADJUST KEYPAD (J)
Quickly access any speed
or incline level by typing
the number and pressing
SPEED (
) or INCLINE (
).
Examples:
• To change the speed to
6.5 mph, press 6–5–SPEED
(
).
• To change the incline to 10%,
press 1–0–0–INCLINE (
).
(NOTE: If there is no decimal
point, you still must enter 0).
* Will not charge USB devices
which require more than 1 amp.
CLASSIC
CONSOLE
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Elegant+Tactile+

Table des Matières