HellermannTyton Relilight Mode D'emploi page 4

Installer information
1 Installer information
Before the product is used for the first time, all persons
who will be using the product must have carefully read
and understood the installation instructions.
This documentation as well as translations hereof are the
property of the HellermannTyton Group. Replication,
editing, reproducing or distribution in whole or in parts
for purposes other than following the original intended
use requires the prior written consent from the
HellermannTyton Group.
1 .1 Field of application
The installation instructions are directed towards
technicians and the user. The installation instructions
only apply for the products in the Relilight series, called
"product" in the following:
TYPE
Relilight V 2 .75 I1
Relilight V 32 .5 I2
Relilight V 61 .5 I2
Relilight V 31 .5 U1
Relilight V 41 U1
Relilight V 32 .5 P1
Relilight V 41 .5 P1
Relilight V 34 P2
Relilight V 36 P2
1 .2 Used labels and symbols
In these installation instructions, different labels and
symbols are used in the text. These are explained in the
following:
• Symbol for an enumeration
f Symbol for an instruction
1 First step
2 Following steps
; Outcome
Display text/screen text
Æ Cross reference
Texts with this symbol contain information on environmental
protection.
Texts with this symbol contain additional information.
4
Article-No .
435-01650
435-01651
435-01652
435-01653
435-01654
435-01655
435-01656
435-01657
435-01658
Operating Instructions • Relilight • 09-2016
1 .3 Safekeeping of documents and actuality
f Keep these installation instructions as well as all other
supplied documents in a safe place, so that they are
available at any time.
f Please note:
Due to the continuous development of the products,
there may be deviations between the documentation
and the product. The current edition can be found at
www.HellermannTyton.com/site/downloads.
1 .4 Intended use
The product is only intended to establish underground
and above-ground cable connections.
The product may only be installed by trained specialised
personnel according to the installation instructions. The
specifications contained in these installation instructions
are based on our current state of research and
development.
Because of the diversity of workmanship and use
possibilities, the user must check the suitability of the
product for the intended purpose.
The product may only be used for the purposes
described in these installation instructions.
The product may only be used in technically perfect
condition in accordance with its intended use and the
installation instructions, and only by competent persons
who are fully aware of the risks involved.
1 .5 EC conformity
The product fulfills the requirements in accordance with:
• Connecting devices for low-voltage circuits for
household and similar purposes
DIN EN 60998-2-1:2004
• Tests on the flammability of plastics for parts in devices
and applications UL94 V0
1 .6 Applicable documents
The nonverbal installation instructions must be observed
for every product.
1 .7 Customer service and spare parts
If you have any questions or suggestions, please contact
HellermannTyton. The contact data is listed at the end of
this documentation.