HellermannTyton Relilight Mode D'emploi page 10

Installation
6 Place the top shell on the bottom shell.
f Ensure that the catch hooks engage.
Assembling the top and bottom shells.
7 Screw the top and bottom shells together with the four
screws.
Screwing the top and bottom shells together.
; The product has been successfully installed.
10
Operating Instructions • Relilight • 09-2016
5 .4 Installing the Relilight V 31 .5 U1
Proceed as follows:
1 Strip the cable as shown in the figure and align the
cores.
8 mm 10 mm
Stripping the cable.
2 Insert the cables into the bottom shell.
Inserting the cables.
3 Connect the cores with the connector.
Connecting the cores.
8,0 - 10,0 mm
3 x 0,5 - 3 x 1,5 mm²