HellermannTyton Relilight Mode D'emploi page 16

Installation
6 Place the top shell on the bottom shell.
f Pay attention to the proper position of the arrows.
f Ensure that the catch hooks engage.
Assembling the top and bottom shells.
7 Screw the top and bottom shells together with the two
screws.
Screwing the top and bottom shells together.
; The product has been successfully installed.
16
Operating Instructions • Relilight • 09-2016
5 .8 Installing the Relilight V 34 P2
Proceed as follows:
1 Strip the cable as shown in the fi gure and align the
cores.
8 mm 30 mm
Stripping the cable.
2 Break out the spacers and unnecessary insert tabs from
the top and bottom shells.
Breaking out the spacers and insert tabs.
3 Depending on the cable diameter, insert the adapters in
the cable joint.
Inserting the adapters.
7,5 - 16,0 mm
3 x 1,0 - 3 x 4,0 mm²