HellermannTyton Relilight Mode D'emploi page 19

6 Place the top shell on the bottom shell.
f Pay attention to the proper position of the arrows.
f Ensure that the catch hooks engage.
Assembling the top and bottom shells.
7 Screw the top and bottom shells together with the four
screws.
Screwing the top and bottom shells together.
; The product has been successfully installed.
6 Maintenance
The product requires no maintenance.
7 Taking out of operation
When installed and used for its intended purpose, the
product will perform continuously without issues.
8 Disposal
After termination of use, the purchaser or the operator
must properly dispose of the product including the
accessories.
This product was manufactured according to the current
environmental protection standards. The materials can be
separated and recycled.
f Observe the national regulations for the disposal of
recyclable materials.
f Do not dispose of the product with domestic waste.
f Take the product to a local collection point or recycling
centre.
f If necessary, contact your local environmental offi ce.
9 Technical data
Characteristics
Safety class
Insulating properties
Ageing resistance
UV resistance
Weather resistance
Shelf life
Operating temperature
Scope of application
Operating Instructions • Relilight • 09-2016
Maintenance
IP68
> 1 kV
Yes
Yes
Yes
Unlimited
-30 °C to +130 °C
Interior rooms, outdoors, in
water, in the ground and in
installation ducts
19