HellermannTyton Relilight Mode D'emploi page 13

7 Connect the top shell with the bottom shell.
f Press the top and bottom shells together until the catch
hooks engage.
Assembling the cable joint.
; The product has been successfully installed.
5 .6 Installing the Relilight V 32 .5 P1
Proceed as follows:
1 Strip the cable as shown in the figure and align the
cores.
10 mm 30 mm
Stripping the cable.
2 Break out the spacers and unnecessary insert tabs from
the top and bottom shells.
Breaking out the spacers and insert tabs.
3 Depending on the cable diameter, insert the adapters in
the cable joint.
Inserting the adapters.
Operating Instructions • Relilight • 09-2016
Installation
6,5 - 12,0 mm
3 x 0,5 - 3 x 2,5 mm²
13