Installing The Relilight V 41.5 P1 - Hellermanntyton Relilight Mode D'emploi

5 .7 Installing the Relilight V 41 .5 P1
Proceed as follows:
1 Strip the cable as shown in the figure and align the
cores.
8 mm 30 mm
Stripping the cable.
2 Break out the unnecessary insert tabs from the top and
bottom shell.
Breaking out the insert tabs.
3 Depending on the cable diameter, insert the adapters in
the cable joint.
Inserting the adapters.
6,5 - 12,0 mm
4 x 0,5 - 4 x 1,5 mm²
f Select the adapters for the corresponding cable
diameters.
< Ø9,5 mm
> Ø9,5 mm
Selecting the adapters.
4 Connect the cores with the connector.
Connecting the cores.
5 Insert the cable connection into the bottom shell.
Inserting the cable connection.
Operating Instructions • Relilight • 09-2016
Installation
15