HellermannTyton Relilight Mode D'emploi page 17

f Select the adapters for the corresponding cable
diameters.
< Ø10,5 mm
< Ø13,0 mm
> Ø13,0 mm
Selecting the adapters.
4 Connect the cores with the connector.
Connecting the cores.
5 Insert the cable connection into the bottom shell.
Inserting the cable connection.
6 Place the top shell on the bottom shell.
f Pay attention to the proper position of the arrows.
f Ensure that the catch hooks engage.
Assembling the top and bottom shells.
7 Screw the top and bottom shells together with the four
screws.
Screwing the top and bottom shells together.
; The product has been successfully installed.
Operating Instructions • Relilight • 09-2016
Installation
17