HellermannTyton Relilight Mode D'emploi page 18

Installation
5 .9 Installing the Relilight V 36 P2
Proceed as follows:
1 Strip the cable as shown in the fi gure and align the
cores.
8 mm 30 mm
Stripping the cable.
2 Break out the spacers and unnecessary insert tabs from
the top and bottom shells.
Breaking out the spacers.
3 Depending on the cable diameter, insert the adapters in
the cable joint.
Inserting the adapters.
18
7,5 - 16,0 mm
3 x 1,0 - 3 x 6,0 mm²
Operating Instructions • Relilight • 09-2016
f Select the adapters for the corresponding cable
diameters.
< Ø10,5 mm
< Ø13,0 mm
> Ø13,0 mm
Selecting the adapters.
4 Connect the cores with the connector.
Connecting the cores.
5 Insert the cable connection into the bottom shell.
Inserting the cable connection.