Work Area; Personal Safety - Pro-Point Procut 9400805 Manuel D'utilisation

V1.0

WORK AREA

1. Operate in a safe work environment. Keep your work area clean,
well-lit and free of distractions. Place lights so you are not working
in a shadow.
2. Keep anyone not wearing the appropriate safety equipment away
from the work area.
3. Remove all unnecessary people from the work area when welding.
Anyone remaining in the work area must wear the appropriate
welding safety equipment.
4. Do not install or use in the presence of flammable gases, dust or
liquids.
5. Cutting sparks and ejected molten slag can start a fire. Remove
combustible materials within 39 ft (12 metres) of the plasma cutter.
See Fire and Explosion Precautions.
6. Have a fire extinguisher readily available (see Fire and Explosion
Precautions).
7. Use protective screens or barriers to protect others from flash and
glare; warn others in the area to look away from the arc.
8. Keep the plasma cutter at least one foot from any wall or structure.
9. Check that the work area is free from fires, sparks or hot debris
before leaving.
10. Store tools properly in a safe and dry location. Keep tools out of
the reach of children.
11. Do not cut on damp surfaces that can transmit the electric current
without taking precautions for the welder and bystanders. The
electrode, welding head and nozzle are electrically 'hot'.

PERSONAL SAFETY

WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National
Standards Institute (ANSI).
Visit www.princessauto.com for more information
60A PROCUT Plasma Cutter 9400805
3