Hazard Definitions - Pro-Point Procut 9400805 Manuel D'utilisation

9400805
INTRODUCTION
The plasma cutter is an DC inverter-based plasma cutting machine
produced using the latest in IGBT technology.
The high temperature plasma stream provides effortless cutting of all
electrically conductive materials including steel, cast Iron, stainless
steel, copper, aluminum, brass, etc. The plasma cutter is suitable for a
wide range of applications including sheet metal fabrication, light
industrial use, site work, automotive, duct work, repair and maintenance
services.
SAFETY
WARNING! Read and understand all instructions before using this
tool. The operator must follow basic precautions to reduce the
risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or
inspection and maintenance instructions.

HAZARD DEFINITIONS

Please familiarize yourself with the hazard notices found in this manual.
A notice is an alert that there is a possibility of property damage, injury
or death if certain instructions are not followed.
DANGER! This notice indicates an immediate and specific hazard that
will result in severe personal injury or death if the proper
precautions are not taken.
WARNING! This notice indicates a specific hazard or unsafe practice
that could result in severe personal injury or death if the
proper precautions are not taken.
CAUTION! This notice indicates a potentially hazardous situation that
may result in minor or moderate injury if proper practices are
not taken.
NOTICE! This notice indicates that a specific hazard or unsafe
practice will result in equipment or property damage, but
not personal injury.
2
60A PROCUT Plasma Cutter
For technical questions call 1-800-665-8685
V1.0