Electrical Safety - Pro-Point Procut 9400805 Manuel D'utilisation

9400805
4.3 Do not wrap the air hose around the tool as sharp edges may
pierce or crack the air hose. Coil the air hose when storing.
5. A damaged or disconnected air hose under pressure may whip
around and inflict personal injury or damage the work area. Secure
the compressor's air hose to a fixed or permanent structure with
clamps or cable ties.
6. Install an in-line shutoff valve or regulator to allow immediate
control over the air supply in an emergency, even if a hose is
ruptured
7. Check the manufacturer's maximum pressure rating for air tools
and accessories. Compressor outlet pressure must be regulated to
never exceed the maximum pressure rating of the tool.

ELECTRICAL SAFETY

WARNING! To reduce risk of electric shock, be certain that the
plug is connected to a properly grounded receptacle.
1. Do not come into physical contact with the cutting current circuit.
The welding current circuit includes:
1.1 The workpiece or any conductive material in contact with it.
1.2 The ground clamp.
1.3 The electrode.
1.4 Any metal parts on the plasma torch.
1.5 The output terminals.
2. Insulate yourself from the electrical current and ground using
electrical insulating mats or covers big enough to prevent physical
contact with the workpiece or ground.
3. Connect the ground clamp as close to the cutting area on the
workpiece as a practical way to prevent welding current from traveling
along an unexpected path and causing an electric shock or fire hazard.
3.1 An option is to attach the ground clamp to a bare metal spot on
a metal workbench. The circuit will be completed as long as the
workpiece is also in full contact with the bare metal workbench.
4. Do not weld on damp surfaces that can transmit the electric current
without taking precautions for the welder and bystanders. The
electrode and nozzle are electrically 'hot'.
12
60A PROCUT Plasma Cutter
For technical questions call 1-800-665-8685
V1.0