PRO-POINT PROCUT 9400805 Manuel D'utilisation page 7

V1.0
strike a welding arc until all bystanders and you (the user) have
welding shields and/or helmets in place.
5. Immediately replace a cracked or broken helmet or a scratched or
damaged lens filter to avoid damage to the eyes or face from arc
flash or ejected molten material.
6. Do not allow the plasma torch to accidentally touch the ground clamp
or grounded work. An arc flash will result from contact and can injury
the unprepared user and bystanders. It can also damage the
plasma cutting machine.
7. Do not handle hot metal or electrode stubs with bare hands.
Handling may result in a burn injury.
8. Do not use the plasma cutting machine if personal movement is
confined or if there is a danger of falling.
9. Keep all panels and covers securely in place when operating the
plasma cutting machine.
10. Insulate the ground clamp when not connected to a workpiece to
prevent contact with any metal object.
11. Do not operate the plasma cutting machine if the plasma torch or
welding cable is wet. Do not immerse them in water. These
components and the plasma cutting machine must be completely
dry before attempting to use them.
12. Do not point the plasma torch at anybody part of yourself or at
anyone else.
13. Do not use a plasma cutting machine to thaw frozen pipes.
14. Insulate yourself from the work and the ground using dry insulation.
Make certain that the insulation is large enough to cover your full
area of physical contact.
15. Never dip the electrode in water for cooling.
16. When not welding, make certain that no part of the electrode circuit
is touching the workpiece or the ground. Accidental contact can
cause overheating and create a fire hazard.
17. Maintain good ventilation of the louvers on this equipment. Good
ventilation is of critical importance for the normal performance and
service life of this equipment.
Visit www.princessauto.com for more information
60A PROCUT Plasma Cutter 9400805
7