Care & Maintenance; Maintenance Schedule - Pro-Point Procut 9400805 Manuel D'utilisation

9400805
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient,
easier to control and will have fewer problems.
2. Inspect the tool fittings, alignment, hoses and power supply cord
periodically. Have damaged or worn components repaired or replaced
by an authorized technician. Only use identical replacement parts
when servicing.
3. Exposure to extremely dusty, damp, or corrosive air is damaging to
the plasma cutting unit. In order to prevent possible failure or fault
of this equipment, clean the dust at regular intervals with clean and
dry compressed air.
4. Follow instructions for lubricating and changing accessories.
5. Only use accessories intended for use with this tool.
6. Keep the tool handles clean, dry and free from oil/grease at all times.
7. Maintain the tool's labels and name plates. These carry important
information. If unreadable or missing, contact Princess Auto Ltd. for
replacements.
WARNING! Only qualified service personnel should repair the
tool. An improperly repaired tool may present a hazard to the
user and/or others.

MAINTENANCE SCHEDULE

Remember that this schedule is based on the assumption that your
machine will be used for its designed purpose. Sustained high-load or
high-temperature operation or use in unusually wet or dusty conditions,
will require more frequent service.
FREQUENCY
Daily
examination
26
60A PROCUT Plasma Cutter
MAINTENANCE
Check to make sure that the knob and switches on the front
and back panels of the plasma cutting unit are working and
correctly set. Replace a switch or knob that is not working or
cannot be set correctly.
Turn the cutting unit on and note if it is shaking, making any
strange sounds or emitting odours. If there is one of the above
problems, have a qualified technician repair the cutting unit.
Check that the fan rotates and is undamaged. Check for and
remove anything blocking the fan if it doesn't rotate. Have a
qualified service technician repair a damaged fan.
For technical questions call 1-800-665-8685
V1.0