PRO-POINT PROCUT 9400805 Manuel D'utilisation page 6

9400805
2. Avoid wearing clothes or jewelry that can become entangled with
the moving parts of a tool. Keep long hair covered or bound.
3. Remove all jewelry or metal items from your person before welding.
Metal items may connect to the plasma cutter's electrical circuit,
causing an injury or death.
4. Do not overreach when operating the tool. Proper footing and balance
enables better control in unexpected situations.
5. Support the workpiece or clamp it to a stable platform. Holding the
workpiece by hand or against your body may lead to personal injury.
6. Do not wear any personal grooming products that are flammable,
such as hair preparations, perfume or cologne with an alcohol base.
7. Remove any combustibles, such as butane lighters or matches,
from your person before doing any welding. Hot welding sparks
may light the matches or ignite leaking lighter fuel.
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to the tool safety
rules. If you use this tool unsafely or incorrectly, you can suffer
serious personal injury.
Cutting produces sparks, molten slag, intense white light, plus infrared
and ultraviolet light. Any of these can cause direct harm to the eyes and
skin of the welder or bystanders.
1. Use the correct tool for the job. This tool was designed for a
specific function. Do not modify or alter this tool or use it for
an unintended purpose.
2. Protect against reflected arc rays. The rays can reflect off shiny
surfaces behind the user, into the helmet and off the filter lens into the
eyes. Remove or cover any reflective surface behind the user such as
a glossy painted surface, aluminum, stainless steel or glass.
3. Cutting produces sparks and molten slag. A cooling bead can
eject chips or fragments of slag. Any of these can cause direct
harm to the eyes or skin of the user or bystanders.
4. Erect protective screens or barriers to protect bystanders from the
flash and glare; warn others in the area not to watch the arc. Do not
6
60A PROCUT Plasma Cutter
For technical questions call 1-800-665-8685
V1.0