Work Area - PRO-POINT PROCUT 80 Manuel

V1.0
INTRODUCTION
The Pro.Point PROCUT 80 Plasma Cutter is an inverter-based plasma
cutting machine produced using the latest in IGBT technology. This
machine is reliable, robust and stacked with features that you can
expect from a quality plasma cutter.
The PROCUT 80 produces a high temperature plasma stream providing
effortless cutting of all electrically conductive materials including steel,
cast Iron, stainless steel, copper, aluminum, brass, etc. The PROCUT 80
is suitable for a wide range of applications including sheet metal
fabrication, light industrial use, site work, automotive, duct work, repair
and maintenance services.
The term welding in this manual includes both welding and plasma cutting.
SAFETY
WARNING! Read and understand all instructions before using this
tool. The operator must follow basic precautions to reduce the
risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or
inspection and maintenance instructions.

WORK AREA

1. Operate in a safe work environment. Keep your work area clean,
well lit and free of distractions.
2. Remove all unnecessary people from the work area when welding.
Anyone remaining in the work area must wear the appropriate
welding safety equipment.
3. Do not install or use in the presence of flammable gases, dust or
liquids.
4. Welding sparks and ejected molten slag can start a fire. Remove
combustible materials within 39 ft (12 metres) of the welding unit.
See Fire and Explosion Precautions.
5. Have a fire extinguisher readily available (see Fire and Explosion
Precautions).
6. Use protective screens or barriers to protect others from flash and
glare; warn others in the area to look away from the arc.
7. Keep the welding unit at least one foot from any wall or structure.
Visit www.princessauto.com for more information
80A PROCUT 80 Plasma Cutter 8784480
3