Ryobi EDP-5530L Manuel D'utilisation page 27

GB
F D
FEATURES (FIG. 1)
TABLE
The table of your drill press rotates 360° and bevels up to
45° for angle drilling.
VARIABLE SPEED
Adjust drilling speed using the variable speed lever on
the side of the tool. Speed can only be changed when the
tool is on.
VICE
Use the vice to secure the workpiece to the table when
drilling.
WORKLIGHT
The integrated worklight can be used to help illuminate
the work area. It requires a 15-watt (maximum), 250-volt,
candelabra-base bulb (not included).
SAFETY MICRO SWITCH
When the belt cover is opened, the micro switch can
automatically stop the machine from working.
TOOLS NEEDED (FIG. 2)
The following tools (not included) are needed for
assembly and alignment:
a. 18 mm WRENCH
b. ADJUSTABLE WRENCH
c. MALLET OR HAMMER
d. PHILLIPS SCREWDRIVER
LOOSE PART LIST (FIG. 3)
The following items are included with the drill press:
3. Feed Handles (3 pcs)
5. Table Adjustment Handle
6. Base
7. Table
8. Chuck
13. Variable Speed Lever
14. Spindle Lock Lever
15. Safety Guard
18. Head Assembly
19. Chuck Tool
20. Worm Gear
21. Table Support
22. Column Assembly
23. Hex Bolts (M8) (4 pcs)
24. Vice
25. Table Lock Handle / Table Support Lock Handle
E I P NL S DK N FIN
English
26. Chuck Key
27. Arbor
28. Hex key (3 mm, 4 mm and 5 mm) (3 pcs)
SPECIFICATIONS
Chuck
Input
Power
No Load
Depth
Spindle Travel
Table Size
Table Movement
Overall Height
Net Weight
ASSEMBLY
UNPACKING
This product requires assembly.
Carefully remove the tool and any accessories from
■
the box. Place it on a level work surface.
Note: This tool is heavy. To avoid back injury, lift with
your legs, not your back, and get help when needed.
Inspect the tool carefully to make sure no breakage or
■
damage occurred during shipping.
Do not discard the packing material until you have
■
carefully inspected the tool, identified all loose parts,
and satisfactorily operated the tool.
If any parts are damaged or missing, please ask for
■
authorized Ryobi service centre for assistance.
WARNING
If any parts are damaged or missing do not
operate this tool until the missing parts are
replaced. Failure to heed this warning could
result in possible serious personal injury.
WARNING
Do not attempt to modify this tool or create
accessories not recommended for use with this
tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING
Do not connect to power supply until assembly is
complete. Failure to comply could result in
accidental starting and possible serious personal
injury.
19
GR H CZ RUS
13 mm
220-240 V, 50 Hz
550 W
450-2500 min
300 mm
80 mm
273 mm diameter
45° bevel, 360° swivel
889 mm
38 kg
RO PL
-1