Connecting
Notes on connection
• Turn off the PC and the
projector before
connecting.
• Refer to the computer's
manual as well.
Connecting to an IBM PC/AT and its
compatible
Connect the projector to a PC having an external
monitor port using the supplied D-sub 15-pin signal
cable.
to
to RGB monitor port
audio
or
port
to
to RGB monitor port
audio
RGB signal cable (supplied)
port
Audio cable (not supplied)
: Signal flow
Change the display resolution after connecting,
referring to "Compatibility" in "Specifications" on
page 26.
Front
to RGB
to AUDIO IN
Connecting
7
-EN