Using The Countdown Function - Sony CPJ-D500 Mode D'emploi

Projecting (continued)
To pause counting
down
Press START.
When you press START
again, the unit
continues counting
down from that
moment.
To stop counting
down
Press SET.
Tips
• Even if you change
the input signal, the
unit continues
counting down.
• The countdown
setting is cancelled
when you turn off the
power of the unit.
16
Projecting
-EN

Using the countdown function

If you have limited time during a situation such as
presentation or lecture, you can check the remaining
time at the right bottom of the projected plane.
You can start counting down from 5, 10, 15, 20, 30 or
60 minutes.
1
Press SET until the desired time for counting down
appears.
Each time you press SET, the time changes from
5:00 n 10:00 n 15:00 n 20:00 n 30:00 n 60:00 n
5:00 ... in sequence.
COUNT DOWN 5:00
2
Press START.
The unit starts counting down.
"COUNTDOWN" indication will go off.
When the remaining time becomes 0:00,
"COUNTDOWN 0:00" indication flashes for 5
seconds and a beep sounds 10 times.
4:59