Adjusting The Picture Of The Rgb Input - Sony CPJ-D500 Mode D'emploi

Adjusting the
picture of the RGB
input
FOCUS
LOCK
Front stand
You can adjust the brightness, centering, tracking
and synchronization.
If necessary, you can also reset the adjustment to the
factory preset level.
The adjustment items change in the following order
as you press FUNCTION.
Adjustment items
BRIGHTNESS: Adjusts the picture brightness.
PICTURE MODE: Selects PC signal (p. 14).
V CENT: If the picture is off the center of the
projected plane in the vertical direction, adjust
the vertical centering.
H CENT: If the picture is off the center of the
projected plane in the horizontal direction,
adjust the horizontal centering.
TRACKING: Eliminates the wide vertical bands on
the picture.
SYNC: Synchronizes the RGB signals. If the RGB
signals are not synchronized, the picture looks
unclear, or has red or blue shadows at the
edges.
ON/STANDBY
POWER
FUNCTION RESET
Control panel
Side stands

Adjusting the picture of the RGB input

LAMP
PC/VIDEO
FUNCTION
VOL
COUNT DOWN
SET START
17
-EN