Sony CPJ-D500 Mode D'emploi page 9

Notes on connection
• Turn off the PC and
the projector before
connecting.
• Refer to the PC's
manual as well.
Connecting to a desktop model
You need to use a commercially available adaptor
illustrated below.
Connector should match
the monitor port of the
desktop model
to to RGB monitor port
audio
Adaptor
port
RGB signal cable (supplied)
Audio cable (not supplied)
: Signal flow
Change the display resolution after connecting,
referring to "Compatibility" in "Specifications" on
page 26.
VGA type (D-sub
15-pin, female)
Front
to RGB
to AUDIO IN
Connecting
9
-EN