Step 3 Connecting The Unit - Sony VPL-XW7000 Manuel De Configuration

Step 3
When making connections, be sure to do the following:
Turn off all devices before making any connections.

Use the proper cables for each connection.

Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or cause a

malfunction. When unplugging a cable, be sure to grip the plug, not the cable itself.
For more information, refer also to the instruction manual of the device to be connected.

Right side of the unit
to HDMI input
: Video signal flow
When you monitor and control the projector via the network, access the Setup page of the projector
(refer to "Using Network Features" in the Help Guide) via a Web browser and enable the desired control
protocol.
12
GB
Connecting the Unit
Connecting the Unit
HDMI cable (not supplied)
Use a Premium High Speed HDMI cable on which the cable type logo is
specified.
Equipment with HDMI
output connectors
AV amplifier
to HDMI output
For more information, refer to "Installation and
Connections" in the Help Guide.
Computer
Speakers