Step 3 Connecting The Unit - Sony VPL-VW290ES Guide De Référence Rapide

Step 3
When making connections, be sure to do the following:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor
picture quality. When pulling out a cable, be sure to pull it out from the plug, not the cable
itself.
• Refer to the operating instructions of the connected equipment.
Right side of the unit
: Video signal flow
When you monitor and control the projector via the network, access the Setup page of the
projector (refer to "Using Network Features" in the Operating Instructions) via a Web browser
and enable the desired control protocol.
Connecting the Unit
Equipment with HDMI
output connectors
HDMI cable (not supplied)
Use a Premium High Speed HDMI cable on which the cable
type logo is specified.
For more information, refer to "Connections and
Preparations" in the Operating Instructions.
Computer
AV amplifier
Speakers
to HDMI output
15
GB