Connecting The Unit - Sony VPL-VW1025ES Guide De Référence Rapide

Step 3
When making connections, be sure to do the following:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or poor picture quality. When
pulling out a cable, be sure to pull it out from the plug, not the cable itself.
• Refer to the operating instructions of the connected equipment.
Right side of the unit
to HDMI input
: Video signal flow
When you monitor and control the projector via the network, access the Setup page of the projector (refer to "Using Network Features" in
the Operating Instructions) via a Web browser and enable the desired control protocol.
6
US

Connecting the Unit

Connecting the Unit
HDMI cable (not supplied)
Use a Premium High Speed HDMI cable on which
the cable type logo is specified.
Equipment with HDMI
output connectors
AV amplifier
For more information, refer to "Connections and Preparations" in
the Operating Instructions.
Computer
Speakers
to HDMI output