Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
About Indicators
The ON/STANDBY or WARNING indicator lights up or flashes if there is any trouble with your projector.
If there is any problem or an error message appears on the screen, refer to "Error Handling" in the Help
Guide.
Flashing/Lighting indicators
(Lights in red)
(Flashes in red)
(Flashes in red)
(Flashes in red)
Both indicators flash
Note
If the symptom persists even after carrying out the above methods, consult with qualified Sony personnel.
If the indicator starts flashing in a way of other than the above, turn off, and then turn on the power with the / (On/
Standby) button on the remote control or control panel of the unit.
If the symptom is shown again, consult with qualified Sony personnel.
14
GB
About Indicators
ON/STANDBY
indicator
The number of
Cause and Remedy
flashes
Three times
The unit does not light properly due to an abnormality of the light
source and light source power. Turn off, then turn on the power after a
while.
If the symptom persists, consult with qualified Sony personnel.
Twice
The internal temperature is unusually high. Check to ensure that
nothing is blocking the ventilation holes and the unit is not being used
at high altitudes.
Three times
The fan is broken. Consult with qualified Sony personnel.
WARNING
indicator
If there is any problem or an error message
appears on the screen, refer to "Error Handling" in
the Help Guide.
Publicité
Chapitres
Table des Matières
