Publicité
17 Troubleshooting
Fault
Product does not start.
Cutting disc does not move,
motor continues to run.
Motor slows down and stops.
Cutting disc runs out of round,
considerable vibrations,
abnormal noises.
Noticeably diminishing work
progress cut and circumferential
spark rim
18 EU Declaration of Conformity
Translation of the original Declaration of Conformity
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
We declare under our sole responsibility that the product
described here complies with the applicable directives
and standards.
Brand:
SCHEPPACH
Art. designation:
WALL CHASER - MNF2250
Item No.
5902602901
EU directives:
2014/30/EU, 2006/42/EC, 2011/65/EU*
* The object of the declaration described above fulfils the
regulations of the directive 2011/65/EU of the European
Parliament and Council from 8th June 2011, on the re-
striction of the use of certain hazardous substances in
electrical and electronic equipment.
Applied standards:
EN 60745-1:2009/A11:2010;
EN 60745-2-22:2011/A11:2013;
EN IEC 55014-1:2021;
EN IEC 55014-2:2021;
EN IEC 61000-3-2:2019/A1:2021;
EN 61000-3-3:2013/A2:2021;
Documentation authorised representative:
Tobias Ihle
Günzburger Str. 69
D-89335 Ichenhausen
Ichenhausen, 28.06.2024
Simon Schunk
Division Manager Product Center
Andreas Pecher
Head of Project Management
28 | GB
Possible cause
Mains voltage is missing,
house fuse responds.
On/off switch defective.
Motor defective.
Flange nut loose.
Workpiece, workpiece resi-
dues block output drive.
Product is overloaded by the
workpiece.
Flange nut is loose.
Cutting disc defective.
Blunt cutting disc
www.scheppach.com
Remedy
Check socket, mains cable, cable, mains plug,
repair by qualified electrician if necessary
Check the house fuse.
Repair by customer service.
Tighten the flange nut (see 8.1).
Remove blockages.
Reduce the pressure on the cutting disc.
Tighten the flange nut (see 8.1).
Tighten the flange nut (see 8.1).
Change the cutting disc.
Sharpen the cutting disc by making
short cuts with abrasive material (e.g. sand-lime brick)
Publicité
