Publicité
Note:
In accordance with the applicable product liability laws, the
manufacturer of this product assumes no liability for dam-
age to the product or caused by the product arising from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised spe-
cialists
• Installing and replacing non-original spare parts
• Improper use
• Failures of the electrical system in the event of the
electrical regulations not being observed.
Note:
The operating manual is part of this product.
It includes important instructions for the safe, proper and
economic operation of the product, for avoiding danger,
for minimising repair costs and downtimes and for in-
creasing the reliability and extending the service life of the
product. In addition to the safety instructions in this oper-
ating manual, you must also observe the regulations ap-
plicable to the operation of the product in your country.
Familiarise yourself with all operating and safety instruc-
tions before using the product. Only operate the product
as described and for the specified areas of application.
Keep the operating manual in a good place and hand
over all documents when passing the product on to third
parties.
2
Product description (fig. 1)
1.
Rear handle
2.
Locking lever
3.
Protective cover
4.
Front handle
5.
Support rollers
6.
Cutting disc
7.
Receptacle spindle
8.
Flange nut
9.
Suction port
10.
On/off switch
11.
Switch lock
12.
Cutting depth scale
13.
Spindle locking
14.
Receptacle flange
3
Scope of delivery (Fig. 2)
Item
Quanti-
Designation
ty
6.
4 x
Cutting disc (pre-assembled)
A.
1 x
Flange spanner
B.
3 x
Spacer disc 4.7 mm
C.
3 x
Spacer disc 6.7 mm
1 x
Wall chaser
1 x
Operating manual
4
Proper use
The wall chaser is a product for slotting predominantly
mineral materials (such as concrete or masonry) without
the use of water. Do not use bonded cut-off wheels or
grinding discs.
Materials that produce hazardous dust or vapours during
processing must not be processed (e.g. asbestos). Sepa-
rating with a coolant is not permitted.
The product may only be used in the intended manner.
Any use beyond this is improper. The user/operator, not
the manufacturer, is responsible for damages or injuries
of any type resulting from this.
An element of the intended use is also the observance of
the safety instructions, as well as the assembly instruc-
tions and operating information in the operating manual.
Persons who operate and maintain the product must be
familiar with the manual and must be informed about po-
tential dangers.
The liability of the manufacturer and resulting damages
are excluded in the event of modifications of the product.
The product may only be operated with original parts and
original accessories from the manufacturer.
The safety, operating and maintenance specifications of
the manufacturer, as well as the dimensions specified in
the technical data, must be observed.
Please note that our products were not designed with the
intention of use for commercial or industrial purposes. We
assume no guarantee if the product is used in commercial
or industrial applications, or for equivalent work.
Explanation of the signal words in
the operating manual
DANGER
Signal word to indicate an imminently haz-
ardous situation which, if not avoided, will re-
sult in death or serious injury.
WARNING
Signal word to indicate a potentially hazard-
ous situation which, if not avoided, could re-
sult in death or serious injury.
CAUTION
Signal word to indicate a potentially hazard-
ous situation which, if not avoided, could re-
sult in minor or moderate injury.
ATTENTION
Signal word to indicate a potentially hazard-
ous situation which, if not avoided, could re-
sult in product or property damage.
5
General power tool safety
warnings
WARNING
Read all safety warnings, instructions, illus-
trations and specifications provided with this
power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
www.scheppach.com
GB | 19
Publicité
