Publicité
WARNING
Particles generated when working with this product may
contain substances that can cause cancer, allergic re-
actions or respiratory diseases.
WARNING
In case of extended working periods, the operating per-
sonnel may suffer circulatory disturbances in their
hands (vibration white finger) due to vibrations.
Raynaud's syndrome is a vascular disease that causes
the small blood vessels on the fingers and toes to
cramp in spasms. The affected areas are no longer
supplied with sufficient blood and therefore appear ex-
tremely pale. The frequent use of vibrating products can
cause nerve damage in people whose circulation is im-
paired (e.g. smokers, diabetics).
If you notice unusual adverse effects, stop working im-
mediately and seek medical advice.
6
Unpacking
WARNING
The product and the packaging material are not
children's toys!
Do not let children play with plastic bags, films or
small parts! There is a danger of choking or suffo-
cating!
• Open the packaging and carefully remove the product.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
damage. Immediately report any damage to the trans-
port company that delivered the Product. Later claims
will not be recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating manual before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Spare parts
can be obtained from your specialist dealer.
• When ordering please provide our article number as
well as type and year of manufacture for the product.
7
Technical data
Rated voltage
Connected load
Idle speed (n)
Dimensions
Cutting wheel
Cutting discs thickness
Cutting disc max. speed
Groove depth
Groove width
Weight
Protection class
Protection category
Subject to technical changes!
*Operating mode S1 (continuous operation)
The product can be operated continuously with the speci-
fied power.
**Operating mode S3 (periodic intermittent operation)
Operation is made up of a nominal load and standstill
time.
Information about the noise level measured in accordance
with applicable standards
(EN ISO 3744:1995, ISO 8528-10:1998):
Noise data
Sound pressure L
Sound power L
Measurement uncertainty K
Vibration parameters
Vibration a
Front handle
Rear handle
Measurement uncertainty K
8
230-240 V~, 50 Hz
Notes:
1800 Watt (S1*)
2250 Watt (S3**,
2min 30s ON/
7min 30s OFF)
5400 rpm
506x235x187 mm
Ø 125 mm
Ø 22, 23 mm
1.9 mm
www.scheppach.com
WARNING
Noise can have serious effects on your health. If the
machine noise exceeds 85 dB, please wear suitable
hearing protection for you and persons in the vicinity.
pA
wA
h
Before commissioning
WARNING
Danger of injury!
Only insert the mains plug into the socket when the
product is ready for use.
WARNING
Tool attachments may be sharp and become hot during
use. Always wear protective gloves when handling the
tool attachments.
• Prior to commissioning, all covers and safety devices
must be mounted correctly. Damaged or illegible stick-
ers must be replaced.
• Before connecting of the product, make certain that
the data on the type plate matches with the mains
power data.
8500 rpm
0–40 mm
8-40 mm
5.50 kg
II /
(Double insulation)
IPX0
102.2 dB
113.2 dB
3 dB
pA
4.207 m/s
2.359 m/s
1.5 m/s
GB | 23
2
2
2
Publicité
