Publicité
Computer Integration
D.I. Recording and Re-Amplification
Quad Cortex allows processing the D.I. track later with, for
example, Neural DSP plug-ins and/or re-amplify the D.I. track
through an amp or back through the Quad Cortex unit again.
Routing:
Preset Grid #1
8 Dart Shifter
D
In
1
The instrument is connected to Quad Cortex's INPUT 1 and it's
being monitored by headphones only. Quad Cortex is connected to
the laptop through USB.
•
Open your DAW and choose Quad Cortex as the main audio
device.
Create a mono audio track and set its input as Input 1.
•
The track will receive the dry input signal coming from your
instrument.
•
Then, create a stereo audio track and set its input as Input 3/4.
The track will receive the processed signal coming from the row
via USB 3/4.
•
Finally, arm both tracks for recording.
The Multi-Out block routes your
signal through XLR Outs 1/2
as well as TRS Outs 3/4, and
USB. It's the default setting for
all Factory Presets and newly
created Presets.
STEREO
Tap any output block in The Grid
then select "Multiple Outputs"
to enable this feature.
A
PRESET
Multi
Out
88
Multiple Outputs
1/2 + 3/4 + USB 3/4
Output 1/2
Publicité
