Publicité
Neural Capture
Testing a Neural Capture
Neural Capture
After the Capture process, your Neural Capture will be ready for
Your Neural Capture is ready. Switch between the reference and Quad Cortex using
the buttons below.
testing.
START FROM SCRATCH
LEVEL
CORTEX
0.00
REFERENCE
•
CORTEX & REFERENCE BUTTONS: Tap them to toggle
between the original device signal and the Neural Capture.
Footswitch A can be pressed or turned to switch between the
two.
•
HEADPHONES KNOB: Sets the output level of Quad Cortex in
the mix (Rotary footswitch B assigned automatically).
•
START FROM SCRATCH BUTTON: Start the Neural Capture
process again.
Saving a Neural Capture
Tap the
SAVE
After naming your Neural Capture, you can add two types of
metadata: Capture Type and Preferred Instrument. It is also
possible to add this metadata when editing a Preset on Quad
Cortex or on Cortex Cloud/Mobile.
Each type has its own icon. It will display on The Grid when the
Capture type has been set.
SAVE
to save your Neural Capture.
Cancel
Name your Neural Capture.
Gain metadata is automatically
calculated by Quad Cortex when
creating a Neural Capture.
Quad Cortex determines how
saturated a Neural Capture is,
giving a raking of 1-10; 1 being
a clean tone and 10 being the
most saturated distortion.
82
Publicité
