Publicité
Presets
Common FX Parameters
PARAMETER
GAIN
DRIVE / OVERDRIVE
TONE
VOLUME
COMP
THRESHOLD
RATE
DEPTH
SYNC
FEEDBACK / MIX /
BLEND
DECAY
PRE DELAY
HIGH / LOW PASS
TRAILS SWITCH
BYPASS
DESCRIPTION
Controls the gain value of the selected device.
Controls the drive value of the selected device.
Controls the treble frequencies. This parameter can let all the treble
frequencies through or cuts a large amount of treble and some high mids.
Sets the overall volume of the selected device.
The amount of gain reduction is determined by this parameter.
Sets the level at which the main parameter operates.
Adjusts the rate of the effect, with higher settings providing faster rates.
Sets the intensity of the modulation.
Allows you to sync effects to the current Quad Cortex Tempo. The Sync Note
value is constrained by the Tempo and the Speed parameter range.
Adjusts the amount of delayed signal fed back into the effect. The higher the
settings, the wetter the signal is.
Determines the length of time the effect sustains.
Sets the time before the effect is heard.
Controls the frequency range of the high and low pass filters.
Trails Off: Any delay or reverb effect is instantly muted when the block is
bypassed. Trails On: Any delay or reverb effect decay naturally when the
block is bypassed.
This button bypasses the block entirely.
49
Publicité
