Publicité
Setting up your Quad Cortex
Tap on an empty space in The Grid to create a new Virtual Device
Block.
Double-tap a block to bypass/activate it.
Tap on a block to access its parameters. You can either use the
touch controls on the screen or the rotary actuators to modify the
parameters.
When a block menu is open, turn the top-right rotary actuator
clockwise or counterclockwise to navigate through the virtual
devices or Neural Captures within the same category without
opening the Virtual Devices Library.
Turning the top-right rotary actuator also changes the position of
the caret in any text field.
Tap on a parameter value to fine control. Write a value with the
numeric keyboard and tap
the I/O Settings menu.
Tap and hold a device block to drag-and-drop it to another place
on The Grid. Drag a block to the upper-right corner to remove it.
1
A
New Preset
In
1
to change it. This also works in
GAIN
50
For more details, check the
Working on The Grid
Remove
Out
1/2
11
x2
section.
Publicité
