Neural Quad Cortex Manuel page 30

Presets
Assigning Expression Pedals
You can assign an expression pedal to any
device (including Splitters, Mixers, and
Lane Output Control parameters). Multiple
parameters can be controlled simultaneously.
To assign an expression pedal, tap a block on The Grid, tap the
contextual menu, then tap "Assign Expression Pedal". Select
the expression pedal you want to use to control the block's
parameters.
Assign Expression Pedal
Please choose which parameters you wish to control.
You can assign more than one at once.
DRIVE MIN RANGE
0.71 0%
GAIN DRIVE
ASSIGN ASSIGNED
TREBLE MASTER
ASSIGN ASSIGN
Use the "Assign" button to assign a parameter to the expression
pedal, and use the
maximum values accessible in the pedal's sweep. Press the
"Done" button at the top-right corner when you're finished.
It's important to remember to calibrate your expression pedal via
the I/O Settings.
MAX RANGE
100%
BASS MIDDLE
ASSIGN ASSIGNED
BYPASS
ASSIGN
button to modify the minimum and
Done
MID FREQ
ASSIGN
30